Storage & Enclosures Applications

5655 Series

Handle

• Designed to be used with most multipoint latches that use a 5/16" or 3/8" square drive mechanism
• Padlockable
• Various mounting options
• Various handle and shank sizes

502-634-K-30

Compression Trigger Latch

• Key-locking adjustable compression trigger latch
• Black powder textured finish
• Grip range .13" to .84"

650/651 Series

Single Bitted Cam Locks

• 90 degree/180 degree CW/CCW rotation
• Spline filler included
• One or two key pulls
• Two keys included
• Five tumbler

157 Series

Single Bitted Cam Locks

• 90 degree/180 degree CW/CCW rotation
• When Masterkeyed, 180 primary key changes available
• Spline filler included
• One or two key pulls
• Two keys included
• Five tumbler

390 Series

Dial Combination Cam Locks

• 90 degree CW/CCW rotation
• 1,000 potential codes
• Resetting combination
• Cam mountable every 45 degrees

V3171 Series

Indoor Key Switch Locks

• Screw type terminals
• Custom wire harnessing available
• V3171CH6, V3171CG6, and V3171CA4 offer 4 disk tumblers and 50 key codes
• Custom logo or company name available on plastic key bow
• Mounting nut standard. Speed clip is available. Designed for applications from .72" to .11"

3-Point Heavy Duty Lock Assembly

5624-U-25

3-point heavy duty lock assembly. Shipped with two 54.5" rods with hole on one and dead bolts. Zinc finish. Used with 5624-SS52 or 5624-52 handle. Ordered separately.

Channel Rod Assembly-47.59"

1-2500-50-65

Channel Rod Assembly-47.59" Length used with 2500-1 Center Cam for enclosure applications. 1-2500-50-65